Coalescing Filters

Part No: 2901208012

Product Type: High‑dust‑load in‑line coalescing filter element

Filtration Rating: 0.01 μm, residual oil content ≤0.01 mg/m³, for heavy‑dust conditions

Rated Flow: 25 Nm³/min

Max Working Pressure: 16 bar

Operating Temperature: ‑20℃ ~ +65℃

Filter Media: Reinforced borosilicate micro‑glass‑fiber coalescing media, reinforced plastic support cage, high‑temperature‑resistant rubber seal kit

Recommended Service Life: 8000 working hours or 1 year. Replace when pressure difference reaches 0.08 bar. Upstream DDp25+ pre‑filter is required. Shorten interval under heavy‑dust conditions.

Main Features

whole kit to prevent bypass leakage caused by aged seals.

Thickened glass‑fiber media with high dirt‑holding capacity. Captures sub‑micron oil mist, condensate and fine solid particles for dusty compressed‑air systems.

Rigid integrated plastic end‑cap and support cage, bayonet drop‑in design for tool‑free quick replacement. Resists high‑speed airflow impact and prevents media deformation.

Optimized media delivers low initial pressure drop to reduce system energy consumption. Good resistance to condensate and compressor‑oil aging.

Reliable end‑face sealing eliminates bypass airflow and guarantees full filtration efficiency.

Installed downstream of DDp25+ pre‑filter as secondary fine‑filtration. Suitable for construction, mining and other dusty working sites for painting, instrument and electronic process air supply.

Application Industries

Screw compressor post‑treatment systems, mining, construction sites, general manufacturing, spray painting and electronics industries. Performs deep‑duty oil‑mist and fine‑particle removal for low‑flow compressed‑air under heavy‑dust conditions.

Product Summary

Excellent dirt‑holding capacity suits dusty environments, delivering low‑oil clean compressed‑air for small‑flow industrial processes.